Automotive Assembly Gloves — Silicone-Free, ESD-Safe Nitrile

Standard nitrile gloves are not guaranteed silicone-free. PharmShield's automotive range is manufactured without silicone, which matters because silicone transfer causes paint fish-eye defects, cratering and adhesion failures. For paint and finishing work, always confirm the glove is specifically silicone-free rather than assuming all nitrile qualifies.

Automotive paint shops use silicone-free, powder-free, low-particulate nitrile gloves — often ESD-safe — so nothing on the glove contaminates the paint surface or attracts static and particulate. PharmShield automotive assembly gloves are built for exactly this: paint, primer, clear-coat, inspection and final assembly.

Our automotive nitrile gloves offer static-dissipative handling for final-assembly and electronics-adjacent work — they let static charge bleed away in a controlled way to protect components and finishes. Note this is static control for contamination and yield, not electrical-shock insulation. For static-critical stations, see our dedicated ESD / anti-static gloves range. See the ESD / anti-static range →

Yes. All PharmShield automotive gloves are powder-free. Powder and particulate are a contamination risk on painted, machined and finished surfaces, so powder-free, low-particulate manufacturing is standard for finishing and inspection work.

Use clean-handling nitrile gloves that are silicone-free, powder-free and AQL 0.65 with full batch traceability, so panels and components stay free of contamination and you get fewer mid-task glove changes. The same gloves suit quality inspection, where surface cleanliness and grip both matter.